First Generation TB's will start production shortly. We already have the prototypes finished and tested. As soon as we finish up the production run for the SRT-4 TB's we will be starting on the first gen ones.

We make Billet Fuel Rails that will fit years 95-05, which includes 2.0 SOHC and DOHC as well as 2.4 DOHC.

These fuel rails are made of the state of the art CNC machine. This to ensure precise measurements are retained. The fuel rail come with both ends tapped out to 3/8 NPT threads and a center port that's tapped to 1/8 NPT. These rails are great for TURBO CARS due to the ability of a return line off the rail. They are also great for Nitrous users or attaching a fuel pressure gauge to it.

We do not included fuel lines or fittings with the rails, because of the difficulty to make a kit to suit everyone's needs. The fuel rails include Brackets to mount them as well as Stainless Steel Button head bolts and washers. They will also fit the SRT-4. The fuel rails will work on the SOHC magnum manifolds, but do require a slight modification to the manifold. There are ridges on the manifold that interfere with the fuel rail from sitting flush. These ridges will need to be grinded off, so that the fuel rail fits, and so the injectors will not leak. For Pictures of the Ridges that are on the Manifold that need to be removed. CLICK HERE. It's very simple to do with an all purpose grinder. Once they are removed the rail will fit perfectly fine. Any questions on this please let me know and I will do my best to assist you. The spots that need to be grinded down are circles in the RED so that you can see what needs to be done. If we can get a picture of what the after shot when they are removed I will post it at a later date.

Some Fuel rail brackets might require you to slot the holes longer or shorter depending on the injectors you use. I had a few reports of this and it's a simple thing to do with a dremel tool. I am making provisions to slot them longer myself to avoid this problem. If for some reason this is a problem with your rail this is what is needed to install it. If you have problems with this please contact myself and I will fix them for you.

Fuel rails come in either anodized or polished finishes. The anodized finishes are Red, black, silver, blue, and purple. Follow the link below for pictures of those finishes.

Fuel rail pictures

FUEL RAIL PRICING

All Anodized Finishes $149.99

Polished Aluminum Finish $149.99

Natural aluminum Finishe $144.99

Installation on Stock System:

• 2 feet of -6an or 3/8 fuel line
• -6an straight socketless female thread fitting or the 2 piece stainless fuel line fittings, this depends on what style of hose you use, whether it be stainless steel or a black socketless hose,
• 3/8 NPT to a -6an 90 degree fitting both ends are male thread. We use EARL's Fittings, because they are cheaper, but the same thing.
• NOTE: If you use Stainless Steel Hoses the part number is SUM-220690. The part numbers are from Summit Racing

 
First Generation dash gauge overlays.

We just finished up on making and anodizing these dash gauge overlays. The overlays are made from aluminum and fit right over the original dash. Installation is very easy and takes approximately 5-10 minutes to install. I offer them in red, blue, purple, silver, and natural finish. The natural finish is great for those who want to paint the overlay a custom color or have it powdercoated a different color. If you there are any q's about this please e-mail me at sales@lfsracing.com

From top to bottom Installed natural finish overlay, anodized purple, anodized silver, anodized red, anodized blue, and natural finish.

Overlay prices are $45 for the anodized finishes and $35 for the natural finish.