Billet Fuel Rails that will fit years 95-05, which includes 2.0 SOHC and DOHC as well as 2.4 DOHC.
These fuel rails are made of the state of the art CNC machine. This to ensure precise measurements are retained. The fuel rail come with both ends tapped out to 3/8 NPT threads and a center port that's tapped to 1/8 NPT. These rails are great for TURBO CARS due to the ability of a return line off the rail. They are also great for Nitrous users or attaching a fuel pressure gauge to it.
We do not included fuel lines or fittings with the rails, because of the difficulty to make a kit to suit everyone's needs. The fuel rails include Brackets to mount them as well as Stainless Steel Button head bolts and washers. They will also fit the SRT-4. The fuel rails will work on the SOHC magnum manifolds, but do require a slight modification to the manifold. There are ridges on the manifold that interfere with the fuel rail from sitting flush. These ridges will need to be grinded off, so that the fuel rail fits, and so the injectors will not leak. For Pictures of the Ridges that are on the Manifold that need to be removed. CLICK HERE. It's very simple to do with an all purpose grinder. Once they are removed the rail will fit perfectly fine. Any questions on this please let me know and I will do my best to assist you. The spots that need to be grinded down are circles in the RED so that you can see what needs to be done. If we can get a picture of what the after shot when they are removed I will post it at a later date.
Some Fuel rail brackets might require you to slot the holes longer or shorter depending on the injectors you use. We did make provisions on our last run so this shoudln't be a issue anymore. Fuel rails come in either anodized or polished finishes. The anodized finishes are Red, black, silver, and blue
Installation on Neon or SRT-4 Stock System:
2 feet of -6an or 3/8 fuel line
-6an straight socketless female thread fitting or the 2 piece stainless fuel line fittings, this depends on what style of hose you use, whether it be stainless steel or a black socketless hose,
3/8 NPT to a -6an 90 degree fitting both ends are male thread. We use EARL's Fittings, because they are cheaper, but the same thing.
NOTE: If you use Stainless Steel Hoses the part number is SUM-220690. The part numbers are from Summit Racing.
*****ALSO FITS THE PTGT CRUISER the neon fittings are not going to be the same as the PT cruiser but The fuel rail will work you will need to see what style fittings you will need angle wise to make this work all these fittings can be bought at any fuel supply store including Summit Racing or Jegs.*****
Special note 3/8NPT is .675 this is not 3/8 standard thread which is much smaller. These rails will fit both -6an which is much smaller then the hole size on the rail with a 3/8npt to -6an 90 degree fitting OR if needing -8an which is .500 size you can use a 3/8npt to -8an 90 degree. The larger fitting might have to be used on the other side of the fuel rail to fit properly on SRT-4 motors due to the waterneck being in the way. But -8an is still smaller then the size on the rail so no restriction will be made by going to a -8an but most users won't need it anyways.
Anodized Fuel Rail: Please Select... Polished SOLD OUT DO NOT ORDER!!!!!
Red
Black SOLD OUT DO NOT ORDER!!!!!
Blue SOLD OUT DO NOT ORDER
Silver
